AMPLIFICATORE PER CUFFIE 120 VOLT
Descrizione
L'Auditor è la nostra interpretazione di un amplificatore per cuffie high-end. La base di tale sviluppo high-end è la nostra collaudata tecnologia di riferimento a 120 Volt. Elemento chiave sono gli amplificatori SPL SUPRA fatti a mano, funzionanti a 120V - ciò corrisponde a circa il doppio delle più moderne tecnologie audio analogiche a semiconduttori. Attraverso tale circuito a 120 volts e alla manifattura, si raggiungono livelli di prestazioni ben al di là dei progeti convenzionali relativamente a gamma dinamica e livelli di distorsione. Tali specifiche tecniche superano tutti gli standard analogici o digitali conosciuti.
Specifiche tecniche
AUDIO:
Frequency response: ‹5 Hz to ›200 kHz ( -3 dB)
CMRR: -80 dBu (@1 kHz, 0dBu input level and unity gain)
Crosstalk @ 1 kHz: -84 dB
THD @ 1 kHz: 0,001 % (@1 kHz, 0dBu input level and unity gain)
Noise (A-weighted): -97 dBu
Dynamic range: 129 Db (@ connection with 600 Ω impedance)
INPUTS:
XLR sockets, electronically balanced
Impedance: ca. 20 kΩ balanced
ca. 10 kΩ unbalanced
Maximum Input Level: +24 dBu
OUTPUTS:
XLR connections: Input thru, electronically balanced
Headphone output: 6,35 mm stereo 1/4" TRS connection
Pin wiring: tip=left, ring=right, shaft=GND
Min. Impedance connected: 9 Ω
POWER AMPLIFIER:
Max. Output Performance: 1,7 W (+32,2 dBm) @ 1 kHz and 600 Ω connection, 360 mW (+25,6 dBm) @ 1 kHz and 30 Ω connection
POWER SUPPLY:
Features: Toroidal transformer with voltage selector
Voltages: 230 V AC, 50 Hz / 115 V AC, 60 Hz
Fuses (slow blow): 200-240 V AC: T 200 mA
100-120 V AC: T 400 m A
POWER CONSUMPTION:
max. 5,6 W/7,9 VA/0,03 A
DIMENSIONS & WEIGHT:
Height x Width x Depth: 95 x 210 x 315 mm
Depth with Volume knob: 335 mm
Height with lifted feet: 127 mm
Weight: 2.65 kg/5,84 lbs.
No products
Shipping
0,00 €
Total
0,00 €